The electronic weighbridge is made of hard materials: carbon steel or stainless steel. The shell of the electronic weighbridge is basically free from problems during long-term use. The recommended electronic weighbridge has problems where we can't see it. We all know that the interior of the weighbridge is full of electronic components, which will inevitably cause some minor problems if they work in a harsh environment for a long time. Electronic weighbridge manufacturer Are we helpless about these problems. If you are not a professional maintenance personnel, please read down.
The next example is that professionals who have been engaged in low help maintenance for a long time provide you with some simple and easy to understand production skills of electronic weighbridge, and help you handle electronic weighbridge failures.
1. When the electronic weighbridge is turned on, the display shows numbers and jumps irregularly.
Solution: For this problem, it is often considered that the junction box has too much moisture and should be dried with a hair dryer.
2. The weighing result is light or heavy after normal startup.
Solution to electronic weighbridge: recalibrate the electronic weighbridge according to the instruction manual. If the problem is still unsolved after calibration, the sensor should be considered damaged.
3. After weighing, the display will not return to zero when the weight is removed.
Solution: The above situation should be caused by signal attenuation due to line damage. Check carefully whether the weighbridge data line is damaged, and replace it if any.
4. Weighing means the number displayed on the display is unstable.
Solution: Check whether the weighbridge is placed on the horizontal plane and readjust its position.
5. After the power is turned on, the electronic weighbridge display has no response.
Solution: Carefully check whether the power connection cable is in good condition and whether the display connection cable is in good condition. Replace immediately if any damage is found.
