Recommendations for installation of electronic truck scale foundation are as follows:
（1） After the truck scale is purchased, the foundation site selection construction shall first be carried out according to the truck scale foundation construction drawings of the purchasing manufacturer; The site selection shall be as solid as possible, and not close to the river bank or loose soil section, otherwise the foundation of the truck scale will sink or even break after a long time of use, affecting the use of the truck scale.
（2） If it is close to the drainage channel, the use of the weighbridge will not be affected in rainy days and other bad weather. In addition, the problem of too many vehicles queuing up for the weighbridge should also be considered. Therefore, site selection is also a great subject, which should be analyzed according to the specific situation.
（3） After the site selection is completed, the site selection and installation method will be based on your own needs. The truck scale foundation has two methods, namely, shallow foundation pit and no foundation pit, which have their own advantages. However, the installation without foundation pit is usually chosen, because this installation method is simpler than shallow foundation pit cleaning, and the weighbridge is easy to maintain, and the drainage condition is relatively good.
（4） Although the cost of shallow foundation pit is high and the construction period is larger than that of no foundation pit, the truck scale platform is flush with the ground, beautiful and convenient for weighing. A very important part of the vehicle scale is the foundation, which must use building concrete as the foundation of the weighbridge. If the foundation is dug below the frozen soil line, the embedded parts and the like must be kept in place when pouring.
（5） After the foundation construction is completed, it will take one week to solidify. In addition, when installing the truck scale, relevant professionals should be invited to install it. The scale is not an ordinary tool. It can be used at any time. It is also a precision weighing instrument. If it is not installed correctly, it cannot be used normally, The weighing room also needs to be built close to the truck scale when it is being built. On the other hand, the remaining configurations of the electronic weighbridge are placed inside, and the recording and timely communication are also carried out during weighing.
(Some materials on this website come from the Internet. If the information displayed on this website infringes the intellectual property rights or other legitimate rights and interests of the media or individuals, please notify us in time, and we will delete it immediately.)
