Product introduction:

The electronic forklift scale is a kind of weighing and measuring instrument for the loading equipment of the electronic scale manufacturer to weigh the loaded materials during the loading process. The electronic forklift scale can provide a printed list of the cumulative value of the weighed materials. The electronic forklift scale is a kind of on-board weighing equipment, which is integrated with the on-board mechanical control part to realize weighing during the on-board travel. It monitors the predetermined weighing position through a proximity switch, Electronic weighbridge manufacturer The hydraulic pressure is converted into the weight of the load in the bucket to realize weighing. It has two different working modes: target mode and accumulation mode. According to the choice of the operator, the load can be automatically accumulated or deducted from the target set value of and.

Product content:

The electronic forklift scale can enable the vehicle to automatically weigh materials while planning urban materials, and is widely used in the control of cargo loading in logistics, warehousing, workshops, coal mines, ports, buildings and railway transportation.

Product function:

● Electronic scale for simultaneous handling and weighing, suitable for pallet weighing and often moving weighing occasions

● Weighing platform is composed of hydraulic manual handling mechanism and load cell, stainless steel junction box, weighing display instrument and signal cable

● Hydraulic driving platform lifting, manual vehicle operation

● Alloy steel sensor: strong lateral force resistance, overload capacity, stable performance, high accuracy, and good reliability

● Special weighing instrument: zero setting, tare removal, accumulation and other functions; Unit switchable (kg/ib)

● Rechargeable battery power supply, AC/DC dual purpose, power failure can also be used continuously for 80 hours

● The basic surface of the scale is sprayed with plastic, which has the characteristics of corrosion prevention and rust prevention. The electronic weighbridge is designed to make the scale body more solid, get rid of the loss caused by weighing and moving at the same time, and increase the service life of the scale.

● Leak proof oil cylinder: to avoid oil leakage, the durability of the oil cylinder will not be affected if the operator is rough in hydraulic operation

● High strength nylon wheels are used for the moving rollers of the carrier, which makes it easier to push.

Operating environment of electronic forklift scale:

● The forklift electronic scale shall be preheated when in use, and the boom shall be lifted 5-10 times. The oil pressure and sensor shall be preheated to the normal operating temperature

● During the operation of electronic weighbridge, when the tipper is lifted, the control lever of the boom should be placed at the extreme rear position first, that is, the tipper is at the rear end

● The boom system shall be strictly lubricated to reduce the friction coefficient of the boom

● Select a flat ground for weighing

● The process of lifting the boom should control the speed evenly

● It is better to set to zero when the vehicle stops running

● Avoid vehicle driving during weighing. If it is necessary to drive, the vehicle speed should be controlled at about 10km/h

● If multiple tippers are equipped, the used tippers must be calibrated during weighing

● Start the vehicle before starting the scale, and turn off the vehicle power after the scale is turned off

● Avoid water flowing into the instrument during cleaning to avoid damage

Electronic scale composition:

● The car body is the whole frame of the electronic forklift scale,

● Four pressure weighing sensors are used to measure the pressure changes borne by the on-board hydraulic system

● Five hole junction box, which is used to collect the pressure signals borne by four sensors and transmit the signals to the on-board instrument

● On board instrument, calculate the weight data and display the weighing results on the screen of the instrument

Weighing range and specification:

Optional configuration:

● Instrument: with printing instrument, stainless steel instrument, upper, lower and limit alarm function instrument, RS232 interface connected to computer instrument, counting and weighing instrument, etc.

matters needing attention:

● The product shall not be overloaded, and shall be specially used for weighing. Pay attention to the humidity and dust in the operating environment

● During operation, there is no rapid drop under heavy load, and the electronic weighbridge is used to avoid damaging the hydraulic cylinder and weighing main parts

● The hydraulic device cannot be raised when the forklift scale is pushed under heavy load

● When using for the first time, use up the pre stored power before charging, and the first charge will take more than 12 hours

● There will be an undervoltage prompt before the weighing display is powered off. At this time, the battery should be charged immediately to ensure the service life of the battery. The first three times must be charged within 10-12 hours to ensure that the battery is fully activated. It can be charged for 4-6 hours each time. Damage to the battery will affect the normal use of the forklift and the stability of the weighing display

● Forklift scales shall be protected from exposure, water, moisture, etc

● 220v AC power supply is used for instrument charging

● The front and rear casters are made of polyurethane as standard, and should not be used on high temperature ground to avoid damage.