-
What is the phenomenon of the number of hops of the weighbridge? The number of hops of the weighbridge means that when the electronic weighbridge is weighing, the number of the display instrument will be unstable, and the value of the electronic weighbridge material instrument will fluctuate up and down without a stable value. If your weighbridge has the above conditions, it means that the weighbridge has failed and the number of hops has occurred. What causes the number of hops of the weighbridge: 1. The weighbridge line is damaged frequently in rainy days
Published on: September 17, 2019 Number of hits: 184
-
When a customer is buying an electronic truck scale, in addition to considering the performance of the truck scale itself, sensors, instruments and other accessories, the foundation of the truck scale cannot be ignored. The suitability of the foundation directly affects the service life and weighing accuracy of a truck scale. And according to the actual environment of the customer's site, how to select the appropriate foundation is also very critical. Foundation pit of electronic truck scale
Published on: August 28, 2019 Number of hits: 85
-
The customer is buying an electronic truck scale. In addition to considering the performance of the truck scale itself, sensors, instruments and other accessories, the foundation of the truck scale cannot be ignored. The suitability of the foundation directly affects the service life and weighing accuracy of a truck scale. And according to the actual environment of the customer's site, how to select the appropriate foundation is also very critical. Foundation pit of electronic truck scale
Published on: August 28, 2019 Clicks: 77
-
1、 Two load cells are directly installed at both ends of the original pulley shaft, which is a common method for the installation of crane electronic hook scale. The specific transformation method is to remove the original U-shaped support plate, weld two small platforms for the installation of the load cell as the installation base of the load cell. After the load cell is installed, press the fixed pulley shaft directly on the load cell, and there should be enough space at both ends of the fixed pulley shaft
Published on: August 28, 2019 Clicks: 175
-
The electronic weighbridge is used more and more, but considering the economic aspect, only a few electronic weighbridge manufacturers will pull the weights to the site for debugging, so does our weighbridge need not be debugged? No, after the electronic weighbridge is installed, check whether all parts of the electronic weighbridge are connected well. The electronic weighbridge should not contact any part of the foundation. The electronic weighbridge should be connected with the surrounding protection
Published on: August 28, 2019 Clicks: 393
-
We can see scales everywhere in our daily life. Electronic scales and electronic weighbridge are very useful to us. Although they are necessary for weighing, what are the differences between electronic scales and electronic weighbridge? Here, the weighbridge manufacturer will introduce the differences between the two and the daily maintenance methods. First of all, electronic scales are suitable for weighing objects
Published on: August 28, 2019 Clicks: 283
-
At present, the current situation of the application of electronic weighbridge in China is not optimistic. We know that the weighing sensor and weighing indicator are the core components of the electronic weighbridge, and they have shown a diversified development trend, including imported and domestic ones, with a wide variety of models. As far as the sensor and display of the weighbridge are concerned, localization is the mainstream direction. At the same time, the components of the electronic weighbridge are
Published on: June 18, 2019 Clicks: 71
-
The electrical apparatus works normally when the delay of each time relay is more than 0.2 seconds, but if one or both of them has a short circuit when the delay is less than 0.2 seconds, the electronic weighbridge recommends that the electric valve trip rectifier bridge is to seal the rectifier tube in a shell, including full bridge and half bridge. The full bridge is to seal the four diodes of the connected bridge rectifier circuit of the weighbridge together. Half bridge is to connect two weighbridges
Published on: July 27, 2016 Clicks: 182
-
1. The machine cannot be started. a When the electronic scale can be started by connecting the battery and only connecting the adapter can not be started, the power supply of the scale is abnormal. b After starting, the buzzer has a normal prompt sound, but the LCD does not flash. c To flash the abnormal sound, check whether the battery is dead. 2 Weighing the weight is not accurate. a Observe whether the internal code value is stable, and whether there is conflict in various parts of the sensor. The electronic weighbridge is special
Published on: December 14, 2017 Clicks: 178
-
Electronic hanging scales are widely used for weighing coal, ore and other bulk materials. This paper introduces the composition and operation principle of the electronic hanging scale, and puts forward the methods, key points and specific measures for the protection of the electronic hanging scale from aspects of improving the accuracy, safety and reliability of the electronic hanging scale. With the rapid development of national economy and science and technology, the electronic hanging scale is fast, accurate and reliable
Published on: December 14, 2017 Number of hits: 121
-
In the morning, an aunt went to the vegetable market to buy vegetables. Before she went to the meat stall, she picked up a piece of meat, which was marked 15 yuan/jin. She did not bargain. The boss threw the meat on the electronic scale, input the quotation "30", and the quotation "19" appeared. The aunt said, "Boss, help me lose an extra 0 in the quotation column!" When the boss heard this, he was upset, but still entered the quotation "30.0", which showed
Published on: July 27, 2016 Number of hits: 253
-
1. First of all, put the scale on a horizontal table, and then turn it on. It should be about 50cm away from the radiation of the mobile phone and computer. The air activity should not be too large. Do not face the air conditioning fan and other large air activity objects. After turning on the machine, it should show 0g (0.0g or 0.00g) before putting the objects on and weighing them. 2. The quotient should be used on a calm level
Published on: July 27, 2016 Number of hits: 146
